Stainless Products

• Airframe sections and aerospace clips
• Rail car structural components
• Trailer and truck body components
• Automotive wheel covers and trim
• Wiper blade clips
• Stove element clips
• Toaster and appliance springs
• Conveyor parts

• Springs: compression, extension, and torsion
• Wire forms, clips, and retaining rings
• Washers, fasteners, and screws
• Aerospace and defense components
• Food processing and kitchen equipment
• Conveyor belts and wire cloth
• Hose clamps and automotive trim

• Nuts, bolts, and screws
• Fittings and couplings
• Shafts, pins, and bushings
• Gears and valve parts
• Aircraft fittings and components
• Electrical and electronic parts
• High-volume screw machine products

• Aircraft fittings and components
• Swaged and upset parts
• Riveted and lightly cold-formed parts
• Screws, nuts, and bolts
• Valve parts and fittings
• Shafts, pins, and bushings
• Precision screw machine parts needing a fine surface finish

• Food and beverage processing equipment
• Kitchen equipment, sinks, and appliances
• Chemical and pharmaceutical tanks and piping
• Architectural trim and panels
• Heat exchangers
• Fasteners, fittings, and valves
• Medical and laboratory equipment
• Machined components and fabrications

• High-strength bolts and studs
• Nuts and threaded fasteners
• Chemical and food processing fasteners
• Valve stems and shafts
• Marine hardware
• Pump components
• Pressure vessel bolting
• Machined high-strength parts

• Furnace parts and fire box sheets
• Heat treating fixtures, baskets, and trays
• Kiln liners and burner parts
• High-temperature containers
• Heat exchangers and exhaust components
• Welding wire for joining dissimilar metals
• Chemical and paper processing equipment

• Furnace parts, muffles, and retorts
• Heat treating baskets, trays, and fixtures
• Kiln and burner components
• Radiant tubes and thermowells
• Heat exchangers and recuperators
• Petrochemical and refinery equipment
• Cryogenic equipment
• Welding wire for high-temperature joint

• Marine hardware and boat fittings
• Chemical and petrochemical processing equipment
• Pharmaceutical and biotech equipment
• Food and dairy processing equipment
• Pulp and paper equipment
• Valves, pumps, and fittings
• Heat exchangers and condensers
• Medical devices and surgical implants
• Fasteners for corrosive service

• Studs and stud bolts
• Heavy hex bolts and cap screws
• Threaded rod
• Flange and pressure vessel bolting
• Marine and offshore bolting
• Chemical and petrochemical plant fasteners
• Valve and pump bolting
• Anchor bolts for corrosive environments

• Orthopedic implants: bone screws, plates, pins, and rods
• Spinal fixation components
• Trauma and fracture fixation devices
• Surgical instruments
• Dental and maxillofacial implants
• Medical wire and guide wire
• Watch cases and high-polish components

• Flue gas desulfurization (FGD) scrubbers
• Chemical and petrochemical process vessels
• Pulp and paper bleach plant equipment
• Power plant condensers
• Food and pharmaceutical processing (hot organic and fatty acids)
• Oil refinery equipment
• Marine components and screens
• Seals and components for oil and gas

• Aircraft exhaust manifolds and collector rings
• Jet engine components
• Expansion joints and bellows
• Heat exchangers
• Furnace parts and heat treating equipment
• Boiler shells and high-temperature piping
• Refinery and petrochemical equipment
• Welded parts that cannot be annealed after welding

• Aircraft exhaust stacks and manifolds
• Jet engine parts
• Expansion joints and bellows
• Refinery and petrochemical equipment
• Boilers and high-temperature piping
• Heat exchangers
• Chemical process equipment
• Welding wire for 321 and 347 assemblies

• Automotive exhaust systems
• Mufflers, resonators, and tailpipes
• Catalytic converter shells
• Heavy truck exhaust and heat shields
• Agricultural equipment and hoppers
• Transformer and electrical cases
• Heat exchanger tubing
• Furnace parts and ductwork

• Valve stems, seats, and trim
• Pump shafts
• Bolts, nuts, and fasteners
• Oil and gas sour service components (QDT)
• Steam and gas turbine blades
• Cutlery and hand tools
• Petroleum fractionating trays
• Mining and wear parts

• Screw machine parts
• Pump shafts (PSQ)
• Motor shafts and armatures
• Valve trim, stems, and bodies
• Gears, pinions, and spindles
• Bolts, nuts, and studs
• Rifle and pistol barrels (416R)
• Fittings and bushings

• Rifle barrels
• Pistol barrels
• Match and competition barrels
• Shotgun barrels and choke tubes
• Firearm actions and receivers
• Bolts and firing pins
• Suppressor components
• Barrel blanks for custom gunsmiths

• Jet engine compressor blades and vanes
• Compressor discs and rings
• Steam turbine blades and buckets
• High-temperature bolting and fasteners
• Aircraft engine shafts
• Valve stems and seats
• Pump parts for hot service
• Components running up to 1,000°F

• Cutlery and knife blades
• Surgical and dental instruments
• Plastic injection molds
• Pump shafts and valve parts
• Scissors and shears
• Gauges and measuring tools
• Needle valves and nozzles
• Hand tools and wear parts

• High-volume screw machine parts
• Needle valves and valve trim
• Gears, pinions, and shafts
• Pump parts and impellers
• Nozzles and orifices
• Surgical and dental instruments
• Bushings and fittings
• Wear parts needing more hardness than 416

• Wellhead and Christmas tree components
• Gate valve bodies, bonnets, and stems
• Downhole tools and completion equipment
• Packers and subs
• Mud motor and drilling components
• Pump shafts for oilfield service
• Choke and manifold parts
• CO2 and wet gas production equipment

• Steam turbine blades and buckets
• High-temperature bolting and studs
• Jet engine compressor components
• Valve stems and parts
• High-temperature fasteners
• Turbine wheels and shafts
• Power generation components
• Hot-service pump parts

• Appliance panels and trim
• Dishwasher and refrigerator liners
• Range hoods and stove trim
• Automotive trim and molding
• Induction-ready cookware
• Sinks and food service equipment
• Architectural interior trim
• Furnace combustion chambers and burner parts

• Screw machine parts
• Valve parts and fittings
• Fasteners, bolts, and nuts
• Gears, pinions, and shafts
• Bushings and spacers
• Appliance components
• Electrical hardware and housings
• Automotive trim hardware

• AC and DC solenoid cores
• Solenoid valve plungers and stops
• Fuel injector components
• Relay cores and armatures
• Magnetic sensors and actuators
• Automotive and aerospace electromechanical parts
• Pole pieces and flux paths
• Magnetic components in corrosive environments

• Pump and propeller shafts
• Marine hardware and fittings
• Aircraft fittings and fasteners
• Valve trim and stems
• Bolting and fasteners
• Beater bars and paper machinery
• Gears and shafts
• Oil and gas components

• Knife blades and cutlery
• Surgical and dental instruments
• Scissors and shears
• Valve seats and balls
• Bearings and bushings
• Gauges and measuring tools
• Nozzles and wear parts
• Hand tools

• Knife blades and cutlery
• Valve balls and seats
• Surgical and dental instruments
• Cutting blades and shear knives
• Bearings and bushings
• Gauge blocks and measuring tools
• Nozzles and wear parts
• Mold components

• Ball and roller bearings
• Valve balls, seats, and stems
• Pump shafts and wear rings
• Nozzles and orifices
• Knife blades and cutlery
• Surgical and dental instruments
• Gauges and measuring tools
• Mold components and dies

• Aircraft landing gear components
• Flap tracks and structural fittings
• Actuator parts and hydraulic components
• High-strength aerospace fasteners
• Jet engine components
• Nuclear reactor components
• Oil and gas valve parts
• Injection mold components

• Aircraft structural parts and fittings
• Valves, valve stems, and seats
• Shafts and gears
• Aerospace fasteners
• Nuclear reactor components
• Chemical processing equipment
• Paper mill equipment
• Pump components

• Aerospace springs
• Retaining rings
• Diaphragms and bellows
• Honeycomb panels
• Aircraft bulkheads and structural parts
• Missile skins
• Pressure vessels
• Spring washers and clips

• Pump shafts and impellers
• Valve stems, balls, and seats
• Oil and gas downhole and wellhead components
• Aerospace structural parts and fittings
• Gears, couplings, and drive shafts
• Fasteners and bolting
• Food processing and paper mill equipment
• Turbine blades and nuclear components

• Springs and spring clips
• Retaining rings and snap rings
• Aerospace sheet metal structures
• Diaphragms and bellows
• Lock washers and spring washers
• Instrument and gauge components
• Surgical instruments
• Electronic contacts and connectors

• Aircraft engine components
• Airframe structural parts
• Bellows and diaphragms
• Springs
• Compressor parts
• High-temperature fasteners
• Aerospace tubing
• Missile components

• Jet engine compressor parts
• Shafts and gears
• High-strength bolts
• Aerospace fittings
• High-temperature aerospace components
• Turbine parts
• Aircraft structural parts
• Valve components

• Aerospace fasteners, actuators, and fittings
• Hydraulic and pneumatic components
• Springs and spring wire
• Surgical instruments and medical devices
• Shafts, pins, and high-strength machined parts
• Nuclear reactor components
• Collets, clamps, and tooling
• Valve and pump parts

• Aircraft landing gear components
• Flap and slat tracks
• Actuators
• High-strength aerospace fasteners
• Surgical instruments
• Oil and gas components
• Gears and shafts
• Structural aerospace fittings

• Storage tanks
• Structural components
• Rebar in corrosive environments
• Water and wastewater treatment
• Pulp and paper equipment
• Heat exchangers
• Bridges and architecture
• Transport tanks

• Oil and gas piping and process equipment
• Chemical processing tanks and vessels
• Heat exchangers and tubing
• Desalination plants
• Pulp and paper digesters
• Marine and seawater components
• Pressure vessels
• Structural components and bridges

• Storage tanks and pressure vessels
• Pulp and paper digesters and bleach plants
• Water and wastewater treatment
• Heat exchangers and feedwater heaters
• Structural components, bridges, and architectural parts
• Chemical and petrochemical process piping
• Rebar and reinforcement in corrosive environments
• Mining and mineral processing equipment

• Offshore oil and gas platforms
• Seawater cooling and firewater systems
• Subsea equipment and umbilicals
• Desalination and reverse osmosis plants
• Flue gas desulfurization scrubbers
• Chemical tankers and process piping
• Heat exchangers
• Pumps, valves, and shafts in seawater service

• Pumps and valves
• Seawater systems
• Offshore oil and gas
• Flue gas desulfurization
• Phosphoric and sulfuric acid equipment
• Mixer and agitator shafts
• Marine shafting
• Chemical processing

• Aircraft hydraulic tubing
• Cryogenic equipment
• Aerospace engine parts
• Chemical processing equipment
• Heat exchangers
• High-temperature components
• Exhaust systems
• Marine hardware

• Marine and boat shafting
• Pump shafts
• Valve stems and fittings
• Fasteners and bolting
• Offshore components
• Chemical processing equipment
• Nuclear components
• Cables and rigging

• Valve stems and seats
• Wear rings and bushings
• Pins and fasteners
• Pump wear parts
• Anti-galling components
• Bearings and bushings
• Marine hardware
• Rail and bridge pins

• Sulfuric acid handling and storage
• Phosphoric acid production equipment
• Seawater cooling and heat exchangers
• Pulp and paper bleach plants
• Flue gas desulfurization scrubbers
• Pharmaceutical and chemical process equipment
• Offshore oil and gas piping
• Watch cases and high-end hardware

• Seawater handling systems
• Desalination plants
• Pulp and paper bleach plants
• Flue gas desulfurization
• Offshore firewater systems
• Food processing equipment
• Heat exchangers
• Chemical processing equipment

• Sulfuric acid processing
• Chemical processing equipment
• Pickling tanks and racks
• Mixing tanks
• Heat exchangers
• Pharmaceutical equipment
• Food processing
• Synthetic rubber and plastics production

• Heat treating muffles and retorts
• Furnace fixtures, baskets, and trays
• Radiant tubes
• Burners and flame shields
• Carburizing and nitriding equipment
• Furnace conveyor belts and rollers
• Petrochemical and refinery heaters
• High-temperature ore processing equipment

Bar, plate, sheet, tube and wire, cut to size, with full mill certifications. Most quotes back within 24 hours.

Bar, plate, sheet, tube and wire, cut to size, with full mill certifications. Most quotes back within 24 hours.

Bar, plate, sheet, tube and wire, cut to size, with full mill certifications. Most quotes back within 24 hours.

Bar, plate, sheet, tube and wire, cut to size, with full mill certifications. Most quotes back within 24 hours.